dth hammers and button bits elevator tungsten carbide tipped tricone bits
Views: 1 Author: Site Editor Publish Time: 2020-10-23 Origin: Site
STEEL MILLING TOOTH BITS
IADC 1 SERIES DRILL BITS These bits are used to drill low-compressive strength, soft formations. Long projection tooth lengths are used on high offset cones to provide the greatest penetration rates possible. Wear-resistant hardfacing is used to control tooth wear. On the softest bit types this hardfacing completely covers the bit teeth.
IADC 2 SERIES DRILL BITS These bits are used to drill high-compressive strength, medium hard formations. Short projection teeth with reduced crest length are used in this series of bit designs. Durable hardfacing is applied to reduce tooth wear.
IADC 3 SERIES DRILL BITS These bits are used to drill hard and abrasive formations. Very short, closely spaced teeth with minimum amounts of hardfacing are used for breakage resistance. These bits must withstand high loads and drill abrasive formations with a crushing, cutting action.
IADC
Rock formation
WOB (KN/mm)
PRM(r/min)
116/117
Low compressive strength, high drill-ability and extremely soft formation, like soft shale, clay, salt rock, etc.
0.35~0.90
180~80
126/127
Low compressive strength, high drill-ability and soft formation, like shale, clay, salt rock and soft limestone, etc.
0.35~1.00
180~80
136/137
Soft to medium soft with low compressive strength or soft with hard interlayer, like anhydrite, soft limestone, sandstone, etc.
0.35~1.05
130~60
216/217
Medium hard formation with relatively high compressive strength and hard interlayer, like hard shale, sandstone. limestone, etc.
Xiamen Bestlink Factory Co., Ltd is committed to provide the best drilling and cutting machine, tools and accessories products in marble and granite stone quarrying, as well as in civil engineering application, especial demolition project. it is now a leading manufacturer of cutting and drilling equipment for the extraction of marble, granite and ornamental stones in china.