Share to:

Mission Shank M30 M40 M50 M60 M80 DTH Hammer Bits

Carbide Button DTH Hammers Drill Bits for Mining and Quarrying. We produce an extensive range of DTH Bits using high grade steel alloy, in various diameters ranging between 76mm to 155 mm (low air pressure) and 3" to 8" (high air pressure).

Quantity:
  • DTH Button Bits
  • BESTLINK

Mission Shank M30 M40 M50 M60 M80 DTH Hammer Bits

DTH drilling is a percussion system driving a piston inside hammer body with up and down motion by compressed air and transmitting an intensive percussion energy to the bit to enable the drilling by crushing the rock. Drilling method by DTH hammer exerts high drilling performance especially for drilling hard rock and contributes for shortening work schedule. Hence, this method is widely utilized for foundation work, landslide prevention work, quarrying services, marine civil work, etc.

BESTLINK company makes and supplies the finest and most efficient Down-the-Hole (DTH) hammers and bits for the mining, construction and water well industries. BESTLINK DTH hammers transmit intensive impact energy with low energy loss. This results in good rock breakage, high penetration rates and high productivity. The equipment is designed to give optimal hole quality, reliability, and long service life, as well as the best blasting results and low total operation cost.

Drill and blast engineers and water well contractors trust BESTLINK's DTH equipment because of the precision engineering and high standards of drilling efficiency built into each of our hammers and bits.

DTH bits specifications:

Hammer inchBits diameterShank
MetricInch
1"64mm-70mm2 1/2"-2 3/4"BR1
2"70mm-95mm2 3/4"-3 3/4"MACH20/BR2
3"90mm-102mm3 1/2"-4"COP32/COP34/MACH303
M30/DHD3.5/BR3
4"105mm-152mm4 1/8"-6"COP44/DHD340/MACH44
SD4/M40/QL40
5"133mm-165mm5 1/4"-6 1/2"COP54/DHD350R/MACH50
SD5/M50/QL50/BR5
6"152mm-254mm4 1/8"-10"COP64/DHD360/SD6
M60/QL60/Bulroc BR6
8"203mm-330mm8"-13"COP84/DHD380/SD8
QL80/M80
10"254mm-380mm10"-15"SD10
NUMA100
12"305mm-508mm12"-20"DHD1120/SD12
NUMA120/NUMA125
To know 12-30 inch bits information, contact us now


DTH hammers specifications:

HammersBit ShankConnection ThreadSuitable bitWorking pressureAir consumption
1-3" Middle-low pressure
DTH hammers
BR1
BR2
BR3
RD40 box
RD50 box
API 2 3/8" Reg
Φ64-Φ76mm
Φ70-Φ90mm
Φ90-Φ110mm
0.7-1.75Mpa0.7 Mpa4.5 m3/min
1.0 Mpa4 m3/min
1.4 Mpa5 m3/min
3" hammersDHD3.5
COP32/COP34
M30
API 2 3/8"RegΦ90-Φ110mm1.0-1.5Mpa1.0 Mpa4.5 m3/min
1.5 Mpa9 m3/min
4" hammersDHD340
COP44
QL40
SD4
M40
API 2 3/8"RegΦ105-Φ130mm1.0-2.5Mpa1.0 Mpa6 m3/min
1.8 Mpa10 m3/min
2.4 Mpa15 m3/min
5" hammersDHD350
COP54
QL50
SD5
M50
API 2 3/8"Reg
API 3 1/2"Reg
Φ130-Φ156mm1.0-2.5Mpa1.0 Mpa9 m3/min
1.8 Mpa15 m3/min
2.4 Mpa23 m3/min
6" hammersDHD360
COP64
QL60
SD6
M60
API 3 1/2"RegΦ152-Φ203mm1.0-2.5Mpa1.0 Mpa10 m3/min
1.8 Mpa20 m3/min
2.4 Mpa28.5 m3/min
8" hammersDHD380
COP84
QL80
SD8
M80
API 4 1/2"RegΦ200-Φ279mm1.0-2.5Mpa1.0Mpa15m3/min
1.8Mpa26m3/min
2.4Mpa34m3/min
10" hammersSD10
NUMA100
API 6 5/8"RegΦ254-Φ330mm1.0-2.5Mpa1.0Mpa22m3/min
1.8Mpa40m3/min
2.4Mpa55m3/min
12" hammersDHD1120
SD12
NUMA120
NUMA125
API 6 5/8"RegΦ305-Φ381mm1.0-2.5Mpa1.0Mpa30m3/min
1.8Mpa56m3/min
2.4Mpa78m3/min


Bestlink Factory

Xiamen Bestlink Factory Co., Ltd  is  committed  to  provide  the  best  drilling  and  cutting machine,  tools and accessories products in marble and granite stone quarrying,  as well as in civil engineering application, especial demolition project. it is now a leading manufacturer of cutting and drilling equipment for the extraction of marble, granite  and ornamental stones in china.  

QUICK LINK

FEEDBACK
Copyright  Xiamen Bestlink Factory Co., Ltd. All rights reserved.